Installing the Nuna® Car Seat Adapter
Learn how to install your Nuna® car seat adapter so you can use the Roam Stroller from day one.



Step 1
Remove Both Accessory Plugs
Apply the stroller parking brake. Remove both plugs from the accessory attachment locations by depressing the button and sliding them out.

Step 2
Insert Adapter
Insert the Nuna® adapter fully (arrows towards stroller nose) and secure the latch on both sides around the stroller frame. Pull upwards on each adapter to test attachment.

Step 3
Recline Seatback
If needed, recline the stroller seat, using the button on the back of the seat, to make room before installing the car seat.

Step 4
Install Infant Car Seat
Lower the car seat, making sure it's facing toward the back of the stroller, onto the adapter and press down firmly until you hear a loud 'CLICK' indicating the car seat is safely installed.
Pro tip: Test the car seat is securely attached by pulling up on the car seat. If the car seat isn't attached, recline the stroller seat back more to allow room for secure attachment.

Removing the Car Seat
To remove the Nuna® infant car seat, you need to depress the buttons on either side of the seat on the base of the handle. Then pull upwards.